Family guides that show their sources Editorial standards
033D prints
Vetted print pick

Tesla Model Y center console organizers, 2025 and newer

A free modular organizer for the front and rear console bins in 2025 and newer Model Y and Model YL cars. Our sister project, Forge 3D Printer, picked it. We haven't printed it yet, so this is a build guide, not a review.

What we checked. The public MakerWorld page and Prusa's filament articles. We haven't tested the fit in our own car or how it holds up over time.

The model on MakerWorld

The official listing is Tesla Y + YL Center Console Organizers (2025+). When we checked it on November 19, 2026, the page described a modular organizer made for post-2025 Tesla Model Y and Model YL cars. It covers the front and rear center console compartments.

The description lists a multi-level design that uses the console's depth. The front organizers nest inside the main piece, and you can arrange the modular sections to suit what you carry. The page says the printed parts drop straight into the factory console.

Print details from the live page

  • Layer height is a standard 0.2 mm, and no supports are needed.
  • The guidelines say "Optimized for PLA."
  • The designer print profile is labeled "0.2mm layer, 3 walls, 15% infill."
  • That profile showed "Designer 8.1 h," "2 plates," and "PLA 328 g."
  • A "4.8(9)" rating mark sat next to the designer profile, and the reviews and ratings heading showed a count of 17. Check the live page for current ratings.

MakerWorld pages change as designers update files and profiles. If a detail isn't listed above, we couldn't confirm it on the live page. Check the MakerWorld page before you print.

Designer credit. The designer's name and profile are on the MakerWorld page.

View the model on MakerWorld

Print it in PETG or ASA, not PLA

The designer's profile uses PLA. That's an easy default, but it's the wrong pick for a part that sits in a parked car all summer.

The Prusa PLA article says PLA "gets soft and deforms at temperatures over 60 °C." The Prusa PETG article says PETG works for interior and most exterior use below 80 °C. The Prusa ASA article lists UV and temperature resistance up to 93 °C.

So print these in PETG or ASA. Use your filament maker's temperature settings, and expect ASA to warp more while it prints.

For the longer material comparison, plus food-contact and choking-hazard notes, see the filament guide on the 3D prints hub.

More builds from Forge are coming

This is our first 3D print guide, picked with Forge 3D Printer. We'll add more household and kid-organization prints as they come in.